If your flooring or natural floor boards or furniture has a natural color, and you have a desire to change the existing shade, This can be done using color tinting, например CLOU или TRAE-LYX. Подобные тонирующие (changing the color of the wood) money is nothing, as mordant for wood.
Preparation of the tree to toning.
Timber should be no cover. If this is a new board, fine . If the tree has been previously handled something, then you need to completely remove the old paint to the wood.
Before applying the stain sanded wood grain sandpaper number 180-230. During the 30 minutes after sanding wood has open pores, which closes again after half an hour , tree “breathing”.
Choosing Stains for wood: training.
We take, for example, powder, water-borne stain CLOU, the instructions prepared color solution ( by mixing the powder with hot water + two minutes to mix , stain is ready for use).Proshkurili wood along the grain. Wooden surface of some water to moisten ( sponge or cloth) , then along the grain proshkurit, take quality brush, for example “Oval brush bristles with Chinese”,
plot the stain with a brush on the wood along the grain abundantly,
можно посмотреть видео о нанесении морилки-бейца:
Stain wood should be easy to go and exactly , no spots ( is the result of pre-moistened wood).
If desired, after a certain time to pay a 2nd coat stain. CLOU stain mixed together . So , for example , You can get a trendy color “wenge stain”, by mixing stain CLOU 168 + Stained CLOU 174 in proportion 1:1, Only the original color is wenge. Если же Вам нравится белый оттенок, it is possible to apply the so-called “beluю morilku”( about this in another article).
Stain is very solidly composition, smallest grinding pigments , so if there is no toning spots , stain without difficulty through all channels and wood fibers, has the effect of , as if the wood in this color rose from nature , supposedly received the tone has a natural basis for proceeding.
In diluted form powder stain wood CLOU has a long shelf life, not damaged. Board , treated stain CLOU, after drying can be treated or painted, например Trae-LUX или AVIS , but you can oil (Golden Veyf)or butter with hard wax ( Trae-Lux), or just wax Golden Veyf.
Another article described in detail: how to apply
oil for parquet, or White Oil.
Any covering on the top of the tree or Stain CLOU морилке Trae Luxury will hold well with excellent adhesion.