Category: WAX

Wax is often used to finish wood. The structure of the finishing wax often includes various Ingredients : carnauba, beeswax, Wax kandelily, Portuguese natural wax. Turpentine is used as a plasticiser mixture of these waxes for easy application on wooden furniture. When mixed with a finishing wax oil for wood obtain material for finishing with the name of “Maslovosk“. Supplements mineral pigments in the product allow us to make waxing furniture, wooden beams and panels with the achievement of extraordinary effects of natural aging of the wood. Often wax (in liquid form) used as wax to create flooring and Effect aging of wood.

Natural wax wood color: Golden Wave

Natural wax for wood Golden Wave

Photos applied colored wax.

Photographs on the proposed color wax is applied to the pine timber.

Waxes for wood most often used to decorate various wooden interior elements. This may be carrying or decorative wooden beams, Hem (lining ) Ceiling, wood walls or partitions, doors, and other miscellaneous furniture in interior. Waxes are rarely used for the treatment of wooden floors or stairs. This is because , that the wax has a lower resistance to wear in comparison with oils such as wood or parquet lacquers. In order, the wax was easier to put it in a small amount of pre-added turpentine. After curing, the wax coating hardens, is not afraid of water and wet cleaning. Such a non-stick coating no pollution. Rub the wax coating is usually a dry cotton cloth. After drying, the product, covered with colored wax have a matte surface. If you want to give a little shine so waxed surfaces, rub them quite a bit ordinary felt. On the processing of wood with hard wax oil – in category “Oil with hard wax for wood”.

Often a wax is used for “waxing wood”, here are some examples of colored wax.

Цветной воск колониал на дубе

Colorful wax “Colonial” Golden Wave на дубе

 

Воск цветной "серо-голубой" на дубе (Golden Wave)

Colorful wax “gray-blue” Golden Wave на дубе

 

Golden Wave цветной белый воск-ясень

Colorful wax “White” by Ash

 

Цветной воск шоколадный Golden Wave

Colorful wax “Chocolate” on a wooden pine beams

 

Цветной белый воск брус сосна

White wax on the pine batten

Colour-Wax-kolonial-golden-wave

Color “Colonial” Wax Golden Wave to a pine milled

Сосновый брус покрыт воском Golden Wave

Воск для дерева Golden Wave цвет “tobacco”.

Colorful wax “tobacco” Golden Wave to a pine milled

Вощеное дерево воском Голден Вэйв на брусе из сосны

Transparent wax Golden Wave on pine batten in a private home

Golden Wave colour wax chokolade

“Chocolate” воск для дерева Golden Wave на сосне

Цветной воск голден вейв "серо-голубой" на брусе из сосны.

Gray-blue colored wax on pine batten

 

White stain wood products.

White stain for toning wooden furniture, flooring and stairs.

 

Fashion trend in the construction and design of persistently direct you thinking to make flooring or walls, furniture in white. Great idea, goal is set, let us understand the possibilities to make the dream a reality. Just want to tell you, my dear readers, it would be just a generalized article about materials for “whitening”, which can be described in one word : white stain.

So the first and basic division (it will simply be a completely different system of woodworking) whether processed white products are in the interior or will it be street ( outer coating).

If we need to cover interior wood , in this case, there is a wide selection , depending on the desired effect , we want to get from the whitening of wood.

So, for example, task, to white painted wood time only , and themselves solid wood fibers retain their natural color , ever had any - any other color. This effect has selected wood in white color on the treated surface can be achieved with hard wax oil Trae Lyx Pro color Wit. Hardwax_white

( The link – more articles of different oils with wax on wood )

Just look at the photo. If the same product is applied to the surface of the wood, which was previously tinted water-stained wood, например Trae Lyx или CLOU, then the wood will have a color stain, and only the wood pores will be white.

Белая морилка : масло с твердым воском белое

Oil with white hard wax (white stain) . Ash

However, we must take into account, that treated wood must certainly have deep pores , pronounced relief wood structure. If the tree does not have the properties of nature, structure can make art (artificially) , mechanically, with special brushes to choose soft fibers.

Creating a white floor , various methods can be used to achieve a variety of results, so, nanensnii such as white oil with wax Trae Lyx turned a bleached floor:

белый лак для дерева и деревянного пола.

Floor (дерево ясень) покрыт белым маслом с воском Trae Lyx Wit.

Oil wax white and can be applied by machine:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

White water-borne wood stain.

If it is about, to white paint not only the pores, a plane full of wood , in that case can use white “aqueous” morilku , such Trae Lyx color stain white parquet number 2537. Of course, as there is a very large choice of stains.

Белая морилка для дерева Trae Lyx

White stain for wood water : Trae Luxury, Netherlands

More details Stain Trae Lyx will be discussed in another article. However, focus your attention on this fact, that the use of water stains included mandatory subsequent protective layers of lacquer , Oil , oil with hard wax or wax.

Oil with white wax.

 

Just one option whitening wood in the interior there is oil with a solid white wax, for example , Golden Wave . I want to clarify , that this product is based on centuries-old recipes of old Scandinavian tradition. In this embodiment, the product is applied 2 or 3 The product's , depends on the degree of whiteness and looking through the tree . Additionally, on a hard wax oil as an anchor layer did not need to put more. This product is finishing. More detail with the process technology, and photos can be found in the article "How to make a white floor". Also when using a white hard wax oil from Golden Wave can change the color of the wood previously with water stains Trae Lyx or CLOU , and then apply the oil with wax. However, you may achieve a certain effect of whitening your own unique timber.

White primer for wood.

 

The next version of the whitening of wood - use special primer Trae Lyx PROJECT SEALER 2K wit - insulating undercoat white parquet. The use of this white soil provides for the mandatory application of the two-component varnish Trae Lyx Project. Of this product is discussed in detail in this article "Nail flooring and stairs" . This combination of lacquer designed for those who appreciate high quality and reliability of finishing top coat for natural flooring and wooden stairs.

Natural wax white.

The next version of the whitening natural wood - use white wax Golden Wave. This product use for furniture , walls , Ceiling ,Beams , railings and other wooden surfaces , are not subject to high loads in the interior.

Golden Wave color white wax - is wax in turpentine, Portugal made of natural wax and special pigments. With this unique color white wax on untreated wood can quickly and easily create a subtle effect. For more on this we said in the article "Waxing colored wax".

White paste for aging wood.

 

Another option is a custom whitening wood , I think , What did you like. This kalkpasta. Creates the effect of a very old , whitened by time and the old tree. Used it for both internal,, and outdoor products. With respect to other materials for whitening wood kalkpasta applied for stairs , parquet , Furniture , windows , shutters , doors , homes , arbors, swings, etc.. More details about kalkpaste we said in the article "Furniture antique calc-paste".

If we need to finish for exterior wood effect whitening , then we can also consider the following options.

White stain on the basis of liquid wax.

Bleaching of wood with wax protective stain white Verfijn Steigerhout beits . Using this product , Do you feel , that go "back to nature" . Stayzherhaut stain white emphasizes the authentic look of natural wood , moreover , Stayzherhaut stain-defender has a gorgeous wood from sineniya and decay over time.

White paint for wood.

 

Whitening effect of wood are also, applying the coating and film-forming. Now this in more detail.

As a primer , which at the same time will have the status of a white stain , You can apply Sigmalayf VS-X. This is a protective stain alkyd based. When using the VS-X Sigmalayf treated wood for a long time to receive protection from the elements and UV. As a finishing coat on Sigmalayf VS-X can be applied as an acrylic blue acrylic Sigmalayf DS , and extremely high quality lacquer alkyd based Avis timberkoat. I draw your attention to a distinctive positive Sigmalayf VS-X. Wood , treated with this product may be a long time to be in the open air , outside in bad weather without finishing. And the wooden surface will not be harmed.

This is not a complete list of methods, using which you can create the effect of whitening wood. However, in his article, I use information on materials , I have personally tested and tested. If you have a task "as whiten the wood", I'd be happy , that my advice helped you at all 100 % .

Your consultant.